# Project Swift: CSIR develops low-cost target drone

- Link: https://www.military.africa/2026/03/project-swift-csir-develops-low-cost-target-drone/
- Published: 2026-03-21T21:58:29+01:00
- Author: Israel Chukwuma and Military Africa

The Council for Scientific and Industrial Research (CSIR) is currently developing
a new, low-cost target drone for the South African National Defence Force (SANDF).
According to a DefenceWeb article, it is known as Project Swift. This initiative
seeks to replace ageing hardware and provide the South African Army with the tools
necessary to counter modern aerial threats, including the proliferation of small
unmanned aerial vehicles (UAVs) and coordinated drone swarms.

For decades, the SANDF relied on the Denel LOCATS (Low Cost Aerial Target System)
for air defence artillery training. Introduced into service in 1991 following a 
development cycle that began in 1989, the LOCATS featured a 3.2-meter wingspan and
a propeller-driven engine capable of reaching speeds up to 310 km/h. While successful
for gunnery practice and missile development, the system is hindered by a heavy 
logistical footprint. LOCATS requires a dedicated truck-mounted rail launcher and
is recovered via parachute, making its deployment in austere environments a complex
undertaking.

ADVERTISEMENT

Complementing the LOCATS was the Denel Skua, a high-speed, turbojet-powered drone
designed to simulate faster threats for surface-to-air and air-to-air engagements.
However, the Department of Defence (DoD) has exhausted its inventory of these drones.
This capability gap led to the inception of [Project Loki](https://www.military.africa/2022/09/denel-debuts-loki-aerial-target-at-aad-2022-expo/),
a high-speed target drone demonstrator first [unveiled ](https://www.military.africa/2022/09/denel-debuts-loki-aerial-target-at-aad-2022-expo/)
by Denel Dynamics at the Africa Aerospace and Defence (AAD) 2022 exhibition.

Project Loki represents a more sophisticated tier of target simulation. The 180 
kg vehicle measures 3.2 meters in length with a 2.45-meter wingspan. Powered by 
two TJ40-G1 turbojet engines, each providing 40 kg of thrust, it can reach speeds
of 630 km/h and altitudes of 8,000 meters. Its modular design allows for the integration
of infrared emitters, Luneburg lenses to enhance radar cross-section, and electronic
warfare payloads such as chaff or flares. Unlike the newer VTOL concepts, Loki still
utilises a hydro-pneumatic launcher designed by the CSIR and a parachute recovery
system.

Project Swift represents a departure from these traditional launch-and-recovery 
methods. Under the leadership of Senior Project Manager Tshegofatso Teane and Principal
Researcher Adrian Niken, the CSIR is prioritising a phased development approach 
to ensure the final product meets specific user requirements. The project is currently
in its first phase, focused on a technology demonstrator.

ADVERTISEMENT

The core innovation of Project Swift is the adoption of electric Vertical Takeoff
and Landing (VTOL) technology. During the SA Army’s Exercise Vukuhlome in November
2025, the CSIR demonstrated this concept using an international commercial off-the-
shelf (COTS) platform known as the Swan. The Swan is a tail-sitter fixed-wing drone
that transitions from a vertical launch to horizontal flight.

Kevin Jamison, Head Engineer of Aerospace Systems at the CSIR, told _DefenceWeb 
_that the VTOL configuration drastically reduces the logistics footprint. Traditional
systems like LOCATS require a specialised launch rail and a larger support crew.
In contrast, an electric VTOL system can be operated by a team of just two: a pilot
and a drone technician. This entire unit, including the aircraft and control station,
can be transported in a single vehicle and launched from nearly any flat surface.
This mobility was proven at Vukuhlome 2025, where the Swan was launched directly
within the exercise area, a feat that would be impossible for rail-dependent systems.

**Addressing emerging threats**

ADVERTISEMENT

The shift toward smaller, more agile target drones is a direct response to battlefield
observations. SANDF personnel deployed in the Democratic Republic of Congo have 
reported encounters with insurgents using small UAVs to drop grenades. These “low-
slow-small” threats are difficult to track with traditional radar and require specialised
training for air defence crews.

The Swift drone is being developed to simulate these tactical threats as well as
more complex scenarios like saturation attacks and drone swarming. While the Swan
served as a conceptual demonstrator, the production version of the Swift drone will
be larger, featuring a three-meter wingspan. To maintain the “low-cost” mandate 
of the project, the CSIR is leveraging advanced manufacturing techniques, including
3D printing. This allows for rapid prototyping and the ability to produce large 
quantities of airframes at a fraction of the cost of traditional composite or metal
structures.

The development of Project Swift is occurring within a broader context of South 
African defence industrial cooperation. In January 2026, the [CSIR and Denel signed](https://www.military.africa/2026/02/csir-and-denel-partner-to-advance-south-african-defence-technology/)
a memorandum of understanding (MoU) to formalise a partnership in research and technology
development. This agreement is intended to modernise the domestic industrial base
and create a structured framework for commercialising new defence technologies.

The CSIR expects to operate advanced development models of the Swift drone later
in 2026. These models will likely see further participation in major force preparation
exercises, potentially including the next iteration of Exercise Vukuhlome in November.
This phased rollout ensures that the SANDF can provide continuous feedback, allowing
the CSIR to refine the flight control software and sensor payloads before full-scale
production begins.

The combination of the high-speed Loki and the low-cost, VTOL Swift will provide
the SANDF with a comprehensive training spectrum. It allows air defence units to
prepare for everything from high-speed jet threats to the asymmetric challenge of
small, weaponised commercial drones. By investing in these indigenous projects, 
South Africa is ensuring that its defence forces remain prepared for the realities
of modern warfare while revitalising its domestic aerospace sector through clever
engineering and strategic partnerships.

### _Related_